Adaptec Raid 8805Q SAS/SATA 12Gb/s 8x Pci-e 3 Controller 8 Port Single

Introduction

Data center, IT, and general consumer server environments have a broad range of requirements - from basic connectivity to extreme data storage capacities. The effectiveness at which their data is accessed and protected is crucial to their ultimate success.. The Adaptec Series 8 12Gb/s RAID Adapter product family directly addresses the connectivity, performance, and data protection needs, unmatched by anything in the industry.

The Adaptec Series 8 RAID adapter family features PMC's PM8063 RAID-on-Chip (ROC), which combines a x8 PCIe Gen3 interface with 12Gb/s SAS ports to enable a new generation of high- performance RAID adapters for the 12Gb/s storage ecosystem. Adaptec Series 8 RAID adapters are available with 8, or 16 native SAS/SATA ports in an LP/MD2 form factor. The mini SAS HD connectors combined with SAS HD cables allow for greater flexibility in configuration options by supporting up to 16 native SAS/SATA ports in a Low-Profile MD2 form factor.

New Levels of Performance
Series 8 adapters perform at up to 6.6 GB/s on sequential reads and up to 5.2 GB/s on sequential writes on parity RAID 5. With 16 direct-connected solid-state drives (SSDs), Series 8 adapters deliver more than 700K IOPS.

Advanced Data Protection
Adaptec RAID Code (ARC) delivers maximum reliability with RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60. ARC also offers RAID Level Migration (the ability to easily migrate RAID levels), Online Capacity Expansion (expand capacity without powering down the server), and Copyback Hot Spare (when a failed drive has been replaced, data is automatically copied from the hot spare back to the restored drive).

Additionally, the auto configuration capability allows users to operate in HBA mode (expose drives to the host directly) or Simple Volume mode (use fast DRAM cache to reduce latency and improve performance), without the need to use setup tools. In RAID mode, they can mix and match all devices and handle them at the same time.

Zero-Maintenance Cache Protection (ZMCP)
Series 8 adapters can be combined with our third-generation AFM-700 flash-based cache protection module (sold separately) to enable instant battery-free cache protection.

Zero-Maintenance Cache Protection (ZMCP), is a revolutionary advancement that solves BBU deficiencies by providing full protection to cached data with no monitoring, maintenance, disposal, or replacement costs. ZMCP features SLC based NAND flash memory with super capacitor technology. During a system power loss, the flash memory-based cache protection can preserve data for years.

Adaptec maxView Storage Manager
Adaptec maxView Storage Manager provides the powerful features of Adaptec Storage ManagerT in an HTML5 web interface that can be viewed in standard desktop or mobile browsers without the need for separate software installation.

Ports & interfaces

Supported storage drive interfaces

SAS, Serial ATA

Host interface

PCI Express x8

PCI Express slots version

3.0

Internal mini-SAS ports

2

Performance

RAID levels

1,5,6,10,50,60,1E

RAID Level Migration

Y

Data transfer rate

12 Gbit/s

Form factor

MD2

Internal memory

1024 MB

S.M.A.R.T. support

Y

Number of devices supported

256

Online Capacity Expansion

Y

Mean time between failures (MTBF)

645612 h

Certification

CE, FCC, UL, C-tick, VCCI, KCC, CNS, RoHS

Processor

Built-in processor

PMC PM8063

Power

Voltage

3.3, 12 V

System requirements

Windows operating systems supported

Y

Linux operating systems supported

Y

Operational conditions

Operating temperature (T-T)

0 - 50 °C

Weight & dimensions

Width

64 mm

Depth

167 mm

Other features

PCI Card form factor

Full-height (low-profile)

PCI Express connector

Y

Quantity

1

Hot-Plug support

Y

Other operating systems supported

Y