Smart-UPS RT 20kVA 230V International

Introduction

Serviceability
Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.

Manageability
Serial connectivity
Provides management of the UPS via a serial port.

SmartSlot
Customize UPS capabilities with management cards.

InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.

LED status indicators
Quickly understand unit and power status with visual indicators.

Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

Marketing features
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Save time with easy and convenient remote/network accessibility.
Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Adaptability
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Protection
Cold-start capable
Provides temporary battery power when the utility power is out.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Input Power Factor Correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Availability
Scalable runtime
Allows additional run time to be quickly added as needed.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Features

UPS topology

Double-conversion (Online)

Output power capacity

20 kVA

Output power

20000 W

Waveform

Sine

Input operation voltage (min)

160 V

Input operation voltage (max)

415 V

Input frequency

40/70 Hz

Output operation voltage (max)

230 V

Output frequency

50/60 Hz

Output frequency regulation

0.1 Hz

Maximum current

87 A

Number of output phases

3

Efficiency

93%

Crest factor

3:1

Emergency Power Off (EPO)

Y

Input current Total Harmonic Distortion (THD)

5%

Noise level

58 dB

Surge protection

Y

Audible alarm(s)

Y

Audible alarm modes

Alarm when on battery, Low battery alarm, Overload alarm

Auto-restart

Y

Ports & interfaces

USB port

Y

Serial interface

Y

Serial interface type

RS-232

SmartSlot

Y

Battery

Battery technology

Sealed Lead Acid (VRLA)

Battery voltage

192 V

Battery life (max)

5 year(s)

Battery recharge time

4 h

Cold start

Y

Design

Form factor

Rackmount/Tower

Product colour

Black

Display type

LCD

LED indicators

Y

International Protection (IP) code

IP20

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-15 - 45 °C

Operating relative humidity (H-H)

0 - 95%

Storage relative humidity (H-H)

0 - 95%

Operating altitude

0 - 2011.68 m

Non-operating altitude

0 - 15240 m

Weight & dimensions

Width

440 mm

Depth

700 mm

Height

306 mm

Weight

142.5 kg

Package width

590 mm

Package depth

790 mm

Package height

535 mm

Packaging data

Cables included

RS-232

Logistics data

Harmonized System (HS) code

85078000